Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Fully integrated electrophysiological subsystems

  • Ambulatory/handheld electronics
  • Low power consumption
  • Wireless communications
  • Signal conditioning expertise
  • Signal processing expertise
  • Patented architecture

Biomedical Signal Processing Module Product Specifications


  BSP Module Specifications
  Processors
  Floating-Point Digital Signal Processor TI TMS320C6727 DSP, 64-bit, 270 MHz
  E-trolZ Signal Acquisition Coprocessor XilinX FPGA Spartan-3A
  USB Client Controller FTDI USB FT245RQ
  Memory
  Flash / SRAM 16 / 128 MB
  DSP 256 KB RAM, 384 KB ROM, 32 KB program cache
  Signal Acquisition Engine
  Type E-trolZ I/O Bus, 4 Mb/s throughput, data validation
  Number of I/O Up to 64 16-bit channels
  Number of Modules Up to 4
  Sample rate (Hz) 100, 200, 400, 1000 (128 – 32,768 available)
  Communications
  USB 2.0 1 full speed, data streaming API
  Status 3 tri-color LEDs, 2 user programmable, 1 reserved
  Programming
  Application Development TI Code Composer Studio V3.3 or higher, Free Evaluation Tool
  JTAG Emulator Numerous supported by Code Composer Studio
  Connections
  Programming 14-pin JTAG header, Tyco 87227-7
  Data Acquisition I/O E-trolZ 30-pin I/O Bus, 3M P50-030P-RR1-EA
    USB 2.0 cable Micro-B receptacle
  USB 2.0 board-to-board 10-pin header, Samtec AW-05-03-G-D-230-075-A
  Physical
    Size  (H x W x D) 95 x 64 x 12 mm (3.75 x 2.5 x 0.5 in)
  Weight 400 g (0.2 lb)
  Power Consumption, Voltage 1.0 W, 5V from USB or medical grade, wall unit power supply
  Classification & Safety
  FDA / EU Risk Class II device / 2B
  IEC 60601-1 Medical Electrical Devices, General Requirements
  UL2601.1 Including US National Deviations for IEC 60601-1
  CSA22.2 Including Canadian National Deviations for
IEC 60601-1
  Ordering Information
  Biomedical Signal Processing Module 10PES010
  BPM Development Kit includes Module, SDK 110DSA320
  Above with Code Composer Studio, JTAG Emulator  110DST320
  Options
  Expansion I/O Port 2 SPI, 2 I2C, 2 Serial, 100 GP
  Electrophysiological Input Module 16 Channel ECG, 32/64 Channel EEG
  Patient Protection Module 4 KV, reinforced insulation, IEC 60601-1 approved
  Software Development Kit Signal acquisition & USB Streaming API for Code Composer Studio
HOME  |  PRODUCTS  |  APPLICATIONS  |  BENEFITS  |  ABOUT US  |  CONTACT US